Heating & Cooling in Oakleigh
First Choice Heating and Cooling is based in Oakleigh, so this is the suburb we know best. Oakleigh homes fall into two very different camps — original post-war brick veneer and interwar homes through the older streets, and the newer townhouses and unit developments that have gone up around the station and Eaton Mall. Those two need completely different answers, and the mistake we see most often is a system chosen for the wrong one.
What we see in Oakleigh homes
The older brick veneer and interwar homes usually have usable roof space, which opens up ducted reverse cycle with proper zoning — one system doing heating and cooling, controlled room by room rather than heating an empty house all day.
The newer townhouses and units are a different problem. Roof space is often minimal or shared, outdoor unit positions are constrained, and there is usually an owners corporation with a say in where a condenser can sit and how it looks from the street. That normally points to split systems or bulkhead units, sized carefully because open-plan living areas behave very differently to closed rooms.
Being based in Oakleigh means we are not travelling across town to look at your job. If you want someone to come and actually see the house before quoting, that is easy to arrange here.
Systems that suit Oakleigh homes.
We don't push one brand or one system type. These are the options we most often end up recommending here, and why.
Ducted reverse cycle
One zoned system for heating and cooling across the whole house — the usual answer for Oakleigh's post-war brick veneer stock.
Learn moreSplit systems
Efficient room-by-room heating and cooling where roof space is limited or the outdoor unit position is constrained.
Learn moreBulkhead systems
A ducted-style outlet where a full ducted system will not fit — common in newer Oakleigh townhouses.
Learn moreHydronic heating
Radiators or underfloor heating running on hot water — no forced air, no draughts, no dust movement.
Learn moreLocal, and easy to get hold of.
Heating and cooling in Oakleigh — answered.
Do you service Oakleigh?
Yes — we're based in Oakleigh. It's our home suburb and where we do a large share of our work, so booking an on-site look before you commit to anything is straightforward.
I'm in an Oakleigh townhouse. Can I install a split system?
Usually yes, but the outdoor unit position needs to work for both the install and your owners corporation. We look at where the condenser can physically go, how the pipe run reaches it, and whether that position is likely to get approval before quoting — rather than after.
What suits an older Oakleigh brick veneer home?
If there's usable roof space, ducted reverse cycle with zoning is usually the efficient answer because you can heat and cool the rooms you're actually using. If the roof space is tight or the layout is chopped up, splits or hydronic radiators often work out better. It depends on the house, which is why we look.
Can you help with the Victorian rebates?
We can talk you through which upgrades are currently rebate-eligible and what that means for your job. Current details are on our rebates page.
We work across South East Melbourne.
Oakleigh is one of the suburbs we cover most regularly. If you're just outside it, we're almost certainly still nearby.
Ready to sort out heating and cooling in Oakleigh?
Start with the 2-minute quiz to see what suits your home, or book a quote and we'll come and look. No pressure, no upsell, just practical advice.